金海燕玻璃棉

联系我们

济南亚青伟业新型建材北京pk10

全国客服电话:13905316491

联系人:刘经理

电话:0531-87960865

传真:0531-87187965

Email:jnyqwy0531@163.com

网址:www.sdyqwy.com

地址:济南市槐荫区威海路1069号恒大时代财富中心2号楼1203室

北京赛车

您的当前位置: 首 页 >> 新闻动态 >> 技术中心

北京赛车

发布日期:2017-10-26 00:00 来源:http://www.fashion61.com 点击:

1、在安装彩涂板生产厂家的时候所用的三通、弯头、阀门都需要在同样的统一设计厚度,在接头的缝隙需要用专业的胶水把它密封。
Three, in the installation of the 1 links, elbow, valve need to be in the same uniform design thickness, the gap in the joints need to use professional glue to seal it.
2、在安装的时候还要注意安装的顺序,在大管后小管,如果是有弯头就要注意先弯头后再直管,最后才是阀门。这样的顺序就是要在安装的时候减少不必要的麻烦。
2, in the installation must pay attention to the installation order, tubular pipe, if it is with the elbows, it is necessary to pay attention to the first elbow and straight, and finally the valve. The order is to reduce unnecessary trouble when you are installing.
3、胶水粘接的时候就注意不要太用力,在所以材料的接口都是在轻微挤压下粘和,这样可能看起来的非常细节的问题,但是这样注意好确实可以给后面减少麻烦。
3, glue bonding time to pay attention to don't too hard, in the interface of the material is in a slight squeeze under the stick and, so that may look very detail, but the problem, but this note can give back to reduce trouble.
4、注意在安装冷冻水管和制冷设备时,福乐斯保温材料这样的橡塑管材的两端和铁管之间的空隙都需涂上胶水粘结起来,粘接宽度应该比橡塑材料厚度要。?庋?鸥?菀装压芙由。
4, pay attention to the gap between at both ends and the pipes in the cooling water and refrigeration equipment installation, Armaflex insulation materials like rubber tubes are required to apply the glue bonding, bonding width should to be thinner than the thickness of the rubber materials. Only in this way easier to pipe is connected.
5、在大管径橡塑管由于包装关系已变成椭圆形的时候,这时候的福乐斯保温材料还可以用,我们要节约材料,这样可以剖开时请剖较扁平的那边,使用另一半来作为材料使用。
5, in large-diameter plastic pipe because of the packaging has become oval, this time the Armaflex insulation materials can also be used, we want to save materials, so you can rip up please cesarean section compared with the flat side, use the other half to use as a material.

相关标签:福乐斯

最近浏览:

在线客服
二维码

扫描二维码

分享
欢迎给我们留言
请在此输入留言内容,我们会尽快与您联系。
姓名
联系人
电话
座机/手机号码